Document Type

Article

Source of Publication

Applied Sciences (Switzerland)

Publication Date

4-1-2023

Abstract

In this article, the compact, ultra-wideband and high-gain MIMO antenna is presented for future 5G devices operating over 28 GHz and 38 GHz. The presented antenna is designed over substrate material Roger RT/Duroid 6002 with a thickness of 1.52 mm. The suggested design has dimensions of 15 mm × 10 mm and consists of stubs with loaded rectangular patch. The various stubs are loaded to antenna to improve impedance bandwidth and obtain ultra-wideband. The resultant antenna operates over a broadband of 26.5–43.7 GHz, with a peak value of gain >8 dBi. A four-port MIMO configuration is achieved to present the proposed antenna for future high data rate devices. The MIMO antenna offers isolation <−30 dB with ECC of <0.0001. The antenna offers good results in terms of gain, radiation efficiency, envelop correlation coefficient (ECC), mean effective gain (MEG), diversity gain (DG), channel capacity loss (CCL), and isolation. The antenna hardware prototype is fabricated to validate the performance of the suggested design of the antenna achieved from software tools, and good correlation between measured and simulated results is observed. Moreover, the proposed work performance is also differentiated with literature work, which verifies that the suggested work is a potential applicant for future 5G compact devices operating over wideband and high gain.

ISSN

2076-3417

Publisher

MDPI AG

Volume

13

Issue

7

Disciplines

Medicine and Health Sciences

Keywords

5G, compact size, high gain, Ka-band, wideband antenna

Scopus ID

85152558678

Creative Commons License

Creative Commons Attribution 4.0 International License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Indexed in Scopus

yes

Open Access

yes

Open Access Type

Gold: This publication is openly available in an open access journal/series

Share

COinS